Industry dynamics

Edge-sealing machine plays an important role in furniture industry. Solid wood furniture industry requires higher and higher performance of edge-sealing machine. However, some problems often arise in the use of edge-sealing machine. These problems seriously affect the working efficiency of edge-sealing machine. The situation of edge-sealing machine troubles the production and manufacture of solid wood furniture enterprises. So these problems arise in the use of edge-sealing machine. What's a good solution to the problem?

Edge banding machine

The problems often occur in the use of edge sealing machine and the solutions are as follows:

1. The downward velocity of the rear end is too fast or the downward pressure is too high, which makes the ruler impact on the plate to produce the phenomenon of knocking.

Solution: After adjustment, the intake/exhaust pressure regulating valve of the full-head cylinder reduces the speed and strength of the full-head downward movement.

2. The problem that the upward pressure of the front-end is too large, and the plate moves to the front-end foot before the impact.

Solution: Adjust the pressure of the pressure regulating valve up front to make its strength softer.

3. The position of the stroke switch of the downlink signal of the front-end is not right or broken. If the plate can not reach the predetermined position or the stroke switch is broken, then there is no downlink signal in the front-end, so there will be a click board.

Solution: Adjust the position of the stroke switch or replace it.

These are the problems and solutions that often occur in the process of using the edge sealing machine. If we strictly operate and use the edge sealing machine according to the above, it will be more convenient and convenient to use.