Company dynamics

Compared with manual work, edge-sealing machine has the advantages of high efficiency, high efficiency, high precision, safety and reliability, and saves manpower. It is an indispensable woodworking machine for modern wood processing enterprises. Edge-sealing machine is usually used in various wood processing and real wood furniture industries.

Use of edge sealing machine:

1. Pre-milling: Double milling cutter is used to re-modify the ripple marks, burrs or non-vertical phenomena caused by cutting board saw and cutting material saw, so as to achieve better edge sealing effect. Make the edge of the sealing strip and the plate more closely, the integrity and aesthetics are better. 1. Glue-coated edge-sealing: Through special structure, the edge-sealing plate and edge-sealing material are coated evenly on both sides to ensure a stronger bonding force.

2. Glue-coated edge-sealing: Through special structure, the edge-sealing plate and edge-sealing material are coated evenly on both sides to ensure a stronger bonding force.

3. Head alignment: Through precise linear rail movement, the cutting surface is smooth and smooth by using automatic tracking by mould and high-frequency and high-speed motor cutting structure.

4. Refinement: All of them adopt the structure of Auto-tracking by mould and high-frequency and high-speed motor to ensure the smoothness and smoothness of the upper and lower parts of the trimmed sheet. It is used to trim the excess edge-sealing materials on and off the edge-sealing strip of the processing plate. The finishing cutter is R-shaped. It is mainly used for PVC and acrylic seals of panel furniture. The seals over 0.8mm thick are preferred.

5. Scraping: It is used to eliminate the ripple marks caused by the cutting process of non-linear movement of trimming, so as to make the upper and lower parts of the plate smoother and neater.

6. Polishing: Use cotton polishing wheels to clean up the processed sheets, and make the sealing end surface smoother by polishing.

7. Slotting: for wardrobe side panels, bottom panels and other direct grooving, reduce the process of cutting board saw more convenient and fast; also for door panel aluminum edge grooving, sealing edge band and material at the same time uniformly glued stepless speed regulation straight line, profiles, electronic time control and travel control feeding belt, cutting belt length accurate.

Edge sealing machine is a large woodworking machine with high price. In order to increase the service life of edge sealing machine, it is necessary to maintain and maintain the edge sealing machine regularly. This is the knowledge that solid wood furniture must know.

Edge banding machine

Maintenance points of edge sealing machine:

1. Clean up regularly. First of all, it is necessary to clean up the waste and all kinds of impurities produced in the process of machine production, so as to prevent the accumulation of waste causing machine jamming and affecting the efficiency of work. Secondly, it is necessary to clean up all kinds of stains on the mechanical surface, to maintain the beauty and neatness of the machinery, and also to place stains on the corrosion of the mechanical surface.

2. Regular inspection. Edge sealing machine should be inspected regularly. Only when problems are found before they occur, can the normal operation of edge sealing machine be guaranteed.

3. Maintain proper workshop temperature. The temperature of the automatic edge sealing machine should not be too high or too low in the working process. The low temperature will cause the oil to freeze and the machine can not run normally. The high temperature will easily cause the inconvenience of heat exhaustion, thus causing damage to the motor, generally about 20 degrees.

4. Regularly add lubricant oil. It is inevitable that wear occurs in the working process of edge sealing machine, and the wear situation will be more serious. Then the main point for maintenance is the use of lubricating oil. The purpose of adding lubricating oil is to slow down the wear and tear of the machine and lengthen its scrap time.

5. Replace accessories in time. In order to ensure that there will be no mechanical failure caused by parts problems in the use of edge sealing machine, it is necessary to replace the parts with serious wear and tear in time.

Above is the use of edge sealing machine and maintenance points related to the introduction, the last warm reminder: edge sealing machine when working, there may be a variety of faults, should learn to deal with in time, troubleshooting, so as to ensure the service life of edge sealing machine!